銷售HYDAC節(jié)流閥，DV-40-01.1/0

銷售HYDAC節(jié)流閥，DV-40-01.1/0

概述：

 cross-section using a throttle spindle. 

The flow rate is dependent on differential pressure and viscosity.

 A turning knob with scale ring allows a sensitive

The needle valve DV-25 is a valve in inline construction 

and shut-off function in both directions. Qmax = 300 l/min Pmax = 350 bar 

 reproducibility of the set values. Various 

installation sizes enable an optimal system adjustment.

HYDAC needle valves are manually actuated flow valves

design with throttle spindle and turning knob.

 When the turning knob is screwed out, the flow rate is increased 

- depending on viscosity and pressure. Throttle 

 for influencing a flow rate by means of an adjustable

特點：

For fine adjustment and shut-off of the flow

Spindle patented secured before complete loosening

To release pressure from accumulator systems

As an emergency drain for lowering a load without a dead man's circuit

For regulating the speed of loads

An Allen set-screw locks the setting of the knob

Choice of four sizes for optimum adaptability to the system

Nickel-plated version available as an option

For system-related damping in hydraulic circuits

銷售HYDAC節(jié)流閥，DV-40-01.1/0